Single Fetch is a new data loading strategy and streaming format. When you enable Single Fetch, Remix will make a single HTTP call to your server on client-side transitions, instead of multiple HTTP calls in parallel (one per loader). Additionally, Single Fetch also allows you to send down naked objects from your loader and action, such as Date, Error, Promise, RegExp, and more.
Remix introduced support for "Single Fetch" (RFC) behind the future.unstable_singleFetch flag in v2.9.0 (later stabilized as future.v3_singleFetch in v2.13.0) which allows you to opt-into this behavior. Single Fetch will be the default in React Router v7.
Enabling Single Fetch is intended to be low-effort up-front, and then allow you to adopt all breaking changes iteratively over time. You can start by applying the minimal required changes to enable Single Fetch, then use the migration guide to make incremental changes in your application to ensure a smooth, non-breaking upgrade to React Router v7.
Please also review the Breaking Changes so you can be aware of some of the underlying behavior changes, specifically around serialization and status/header behavior.
1. Enable the future flag
export default defineConfig({
plugins: [
remix({
future: {
// ...
v3_singleFetch: true,
},
}),
// ...
],
});
2. Deprecated fetch polyfill
Single Fetch requires using undici as your fetch polyfill, or using the built-in fetch on Node 20+, because it relies on APIs available there that are not in the @remix-run/web-fetch polyfill. Please refer to the Undici section in the 2.9.0 release notes below for more details.
If you are using Node 20+, remove any calls to installGlobals() and use Node's built-in fetch (this is the same thing as undici).
If you are managing your own server and calling installGlobals(), you will need to call installGlobals({ nativeFetch: true }) to use undici.
- installGlobals();
+ installGlobals({ nativeFetch: true });
If you are using remix-serve, it will use undici automatically if Single Fetch is enabled.
If you are using miniflare/cloudflare worker with your remix project, ensure your compatibility flag is set to 2023-03-01 or later as well.
3. Adjust headers implementations (if necessary)
With Single Fetch enabled, there will now only be one request made on client-side navigations even when multiple loaders need to run. To handle merging headers for the handlers called, the headers export will now also apply to loader/action data requests. In many cases, the logic you already have in there for document requests should be close to sufficient for your new Single Fetch data requests.
4. Add nonce to <RemixServer> (if you are using a CSP)
The <RemixServer> component renders inline scripts that handle the streaming data on the client side. If you have a content security policy for scripts with nonce-sources, you can use <RemixServer nonce> to pass through the nonce to these <script> tags.
5. Replace renderToString (if you are using it)
For most Remix apps it's unlikely you're using renderToString, but if you have opted into using it in your entry.server.tsx, then continue reading, otherwise you can skip this step.
In order to maintain consistency between document and data requests, turbo-stream is also used as the format for sending down data in initial document requests. This means that once opted-into Single Fetch, your application can no longer use renderToString and must use a React streaming renderer API such as renderToPipeableStream or renderToReadableStream) in entry.server.tsx.
This does not mean you have to stream down your HTTP response, you can still send the full document at once by leveraging the onAllReady option in renderToPipeableStream, or the allReady promise in renderToReadableStream.
On the client side, this also means that your need to wrap your client-side hydrateRoot call in a startTransition call because the streamed data will be coming down wrapped in a Suspense boundary.
There are a handful of breaking changes introduced with Single Fetch - some of which you need to handle up-front when you enable the flag, and some you can handle incrementally after enabling the flag. You will need to ensure all of these have been handled prior to updating to the next major version.
Changes that need to be addressed up front:
fetch polyfill: The old installGlobals() polyfill doesn't work for Single Fetch, you must either use the native Node 20 fetch API or call installGlobals({ nativeFetch: true }) in your custom server to get the undici-based polyfillheaders export applied to data requests: The headers function will now apply to both document and data requestsChanges to be aware of that you may need to handle over-time:
turbo-stream, which means that we can stream down more complex data than just JSONloader and action functions are no longer automatically converted into a JSON Response and are serialized as-is over the wireFuture interface with unstable_singleFetch: trueaction revalidation: Revalidation after an action 4xx/5xx Response is now opt-in, versus opt-outWith Single Fetch enabled, you can go ahead and author routes that take advantage of the more powerful streaming format.
Future interface with unstable_singleFetch: true. You can read more about this in the Type Inference section.
With Single Fetch you can return the following data types from your loader: BigInt, Date, Error, Map, Promise, RegExp, Set, Symbol, and URL.
// routes/blog.$slug.tsx
import type { LoaderFunctionArgs } from "@remix-run/node";
export async function loader({
params,
}: LoaderFunctionArgs) {
const { slug } = params;
const comments = fetchComments(slug);
const blogData = await fetchBlogData(slug);
return {
content: blogData.content, // <- string
published: blogData.date, // <- Date
comments, // <- Promise
};
}
export default function BlogPost() {
const blogData = useLoaderData<typeof loader>();
// ^? { content: string, published: Date, comments: Promise }
return (
<>
<Header published={blogData.date} />
<BlogContent content={blogData.content} />
<Suspense fallback={<CommentsSkeleton />}>
<Await resolve={blogData.comments}>
{(comments) => (
<BlogComments comments={comments} />
)}
</Await>
</Suspense>
</>
);
}
If you are currently returning Response instances from your loaders (i.e., json/defer) then you shouldn't need to make many changes to your app code to take advantage of Single Fetch.
However, to better prepare your upgrade to React Router v7 in the future, we recommend that you start making the following changes on a route-by-route basis, as that is the easiest way to validate that updating the headers and data types doesn't break anything.
Without Single Fetch, any plain Javascript object returned from a loader or action is automatically serialized into a JSON response (as if you returned it via json). The type inference assumes this is the case and infers naked object returns as if they were JSON serialized.
With Single Fetch, naked objects will be streamed directly, so the built-in type inference is no longer accurate once you have opted-into Single Fetch. For example, they would assume that a Date would be serialized to a string on the client š.
To switch over to Single Fetch types, you should augment Remix's Future interface with v3_singleFetch: true.
You can do this in any file covered by your tsconfig.json > include.
We recommend you do this in your vite.config.ts to keep it colocated with the future.v3_singleFetch future flag in the Remix plugin:
declare module "@remix-run/server-runtime" {
// or cloudflare, deno, etc.
interface Future {
v3_singleFetch: true;
}
}
Now useLoaderData, useActionData, and any other utilities that use a typeof loader generic should be using Single Fetch types:
import { useLoaderData } from "@remix-run/react";
export function loader() {
return {
planet: "world",
date: new Date(),
};
}
export default function Component() {
const data = useLoaderData<typeof loader>();
// ^? { planet: string, date: Date }
}
In general, functions cannot be reliably sent over the network, so they get serialized as undefined:
import { useLoaderData } from "@remix-run/react";
export function loader() {
return {
planet: "world",
date: new Date(),
notSoRandom: () => 7,
};
}
export default function Component() {
const data = useLoaderData<typeof loader>();
// ^? { planet: string, date: Date, notSoRandom: undefined }
}
Methods are also not serializable, so class instances get slimmed down to just their serializable properties:
import { useLoaderData } from "@remix-run/react";
class Dog {
name: string;
age: number;
constructor(name: string, age: number) {
this.name = name;
this.age = age;
}
bark() {
console.log("woof");
}
}
export function loader() {
return {
planet: "world",
date: new Date(),
spot: new Dog("Spot", 3),
};
}
export default function Component() {
const data = useLoaderData<typeof loader>();
// ^? { planet: string, date: Date, spot: { name: string, age: number, bark: undefined } }
}
clientLoader and clientActionclientLoader args and clientAction args as that is how our types detect client data functions.
Data from client-side loaders and actions are never serialized so types for those are preserved:
import {
useLoaderData,
type ClientLoaderFunctionArgs,
} from "@remix-run/react";
class Dog {
/* ... */
}
// Make sure to annotate the types for the args! š
export function clientLoader(_: ClientLoaderFunctionArgs) {
return {
planet: "world",
date: new Date(),
notSoRandom: () => 7,
spot: new Dog("Spot", 3),
};
}
export default function Component() {
const data = useLoaderData<typeof clientLoader>();
// ^? { planet: string, date: Date, notSoRandom: () => number, spot: Dog }
}
The headers function is now used on both document and data requests when Single Fetch is enabled. You should use that function to merge any headers returned from loaders executed in parallel, or to return any given actionHeaders.
With Single Fetch, you no longer need to return Response instances and can just return your data directly via naked object returns. Therefore, the json/defer utilities should be considered deprecated when using Single Fetch. These will remain for the duration of v2 so you don't need to remove them immediately. They will likely be removed in the next major version, so we recommend remove them incrementally between now and then.
For v2, you may still continue returning normal Response instances and their status/headers will take effect the same way they do on document requests (merging headers via the headers() function).
Over time, you should start eliminating returned Responses from your loaders and actions.
loader/action was returning json/defer without setting any status/headers, then you can just remove the call to json/defer and return the data directlyloader/action was returning custom status/headers via json/defer, you should switch those to use the new data() utility.If your app has routes using clientLoader functions, it's important to note that the behavior of Single Fetch will change slightly. Because clientLoader is intended to give you a way to opt-out of calling the server loader function - it would be incorrect for the Single Fetch call to execute that server loader. But we run all loaders in parallel and we don't want to wait to make the call until we know which clientLoader's are actually asking for server data.
For example, consider the following /a/b/c routes:
// routes/a.tsx
export function loader() {
return { data: "A" };
}
// routes/a.b.tsx
export function loader() {
return { data: "B" };
}
// routes/a.b.c.tsx
export function loader() {
return { data: "C" };
}
export function clientLoader({ serverLoader }) {
await doSomeStuff();
const data = await serverLoader();
return { data };
}
If a user navigates from / -> /a/b/c, then we need to run the server loaders for a and b, and the clientLoader for c - which may eventually (or may not) call it's own server loader. We can't decide to include the c server loader in a single fetch call when we want to fetch the a/b loader's, nor can we delay until c actually makes the serverLoader call (or returns) without introducing a waterfall.
Therefore, when you export a clientLoader that route opts-out of Single Fetch and when you call serverLoader it will make a single fetch to get only it's route server loader. All routes that do not export a clientLoader will be fetched in a singular HTTP request.
So, on the above route setup a navigation from / -> /a/b/c will result in a singular single-fetch call up front for routes a and b:
GET /a/b/c.data?_routes=routes/a,routes/b
And then when c calls serverLoader, it'll make it's own call for just the c server loader:
GET /a/b/c.data?_routes=routes/c
Because of the new streaming format used by Single Fetch, raw JavaScript objects returned from loader and action functions are no longer automatically converted to Response instances via the json() utility. Instead, in navigational data loads they're combined with the other loader data and streamed down in a turbo-stream response.
This poses an interesting conundrum for resource routes which are unique because they're intended to be hit individually -- and not always via Remix APIs. They can also be accessed via any other HTTP client (fetch, cURL, etc.).
If a resource route is intended for consumption by internal Remix APIs, we want to be able to leverage the turbo-stream encoding to unlock the ability to stream down more complex structures such as Date and Promise instances. However, when accessed externally, we'd probably prefer to return the more easily consumable JSON structure. Thus, the behavior is slightly ambiguous if you return a raw object in v2 - should it be serialized via turbo-stream or json()?
To ease backwards-compatibility and ease the adoption of the Single Fetch future flag, Remix v2 will handle this based on whether it's accessed from a Remix API or externally. In the future Remix will require you to return your own JSON response if you do not want raw objects to be streamed down for external consumption.
The Remix v2 behavior with Single Fetch enabled is as follows:
When accessing from a Remix API such as useFetcher, raw Javascript objects will be returned as turbo-stream responses, just like normal loaders and actions (this is because useFetcher will append the .data suffix to the request)
When accessing from an external tool such as fetch or cURL, we will continue this automatic conversion to json() for backwards-compatibility in v2:
Response objectexport function loader() {
return {
message: "My externally-accessed resource route",
};
}
export function loader() {
return Response.json({
message: "My externally-accessed resource route",
});
}
Previously, Remix used JSON.stringify to serialize your loader/action data over the wire, and needed to implement a custom streaming format to support defer responses.
With Single Fetch, Remix now uses turbo-stream under the hood which provides first class support for streaming and allows you to automatically serialize/deserialize more complex data than JSON. The following data types can be streamed down directly via turbo-stream: BigInt, Date, Error, Map, Promise, RegExp, Set, Symbol, and URL. Subtypes of Error are also supported as long as they have a globally available constructor on the client (SyntaxError, TypeError, etc.).
This may or may not require any immediate changes to your code once enabling Single Fetch:
json responses returned from loader/action functions will still be serialized via JSON.stringify so if you return a Date, you'll receive a string from useLoaderData/useActionDatadefer instance or a naked object, it will now be serialized via turbo-stream, so if you return a Date, you'll receive a Date from useLoaderData/useActionData
defer responses), you may just wrap any existing naked object returns in jsonThis also means that you no longer need to use the defer utility to send Promise instances over the wire! You can include a Promise anywhere in a naked object and pick it up on useLoaderData().whatever. You can also nest Promise's if needed - but beware of potential UX implications.
Once adopting Single Fetch, it is recommended that you incrementally remove the usage of json/defer throughout your application in favor of returning raw objects.
Previously, Remix has a concept of an ABORT_TIMEOUT built-into the default entry.server.tsx files which would terminate the React renderer, but it didn't do anything in particular to clean up any pending deferred promises.
Now that Remix is streaming internally, we can cancel the turbo-stream processing and automatically reject any pending promises and stream up those errors to the client. By default, this happens after 4950ms - a value that was chosen to be just under the current 5000ms ABORT_DELAY in most entry.server.tsx files - since we need to cancel the promises and let the rejections stream up through the React renderer prior to aborting the React side of things.
You can control this by exporting a streamTimeout numeric value from your entry.server.tsx and Remix will use that as the number of milliseconds after which to reject any outstanding Promises from loader/action's. It's recommended to decouple this value from the timeout in which you abort the React renderer - and you should always set the React timeout to a higher value so it has time to stream down the underlying rejections from your streamTimeout.
// Reject all pending promises from handler functions after 5 seconds
export const streamTimeout = 5000;
// ...
function handleBrowserRequest(
request: Request,
responseStatusCode: number,
responseHeaders: Headers,
remixContext: EntryContext
) {
return new Promise((resolve, reject) => {
const { pipe, abort } = renderToPipeableStream(
<RemixServer
context={remixContext}
url={request.url}
abortDelay={ABORT_DELAY}
/>,
{
onShellReady() {
/* ... */
},
onShellError(error: unknown) {
/* ... */
},
onError(error: unknown) {
/* ... */
},
}
);
// Automatically timeout the react renderer after 10 seconds
setTimeout(abort, 10000);
});
}
In addition to the simpler mental model and the alignment of document and data requests, another benefit of Single Fetch is simpler (and hopefully better) caching behavior. Generally, Single Fetch will make fewer HTTP requests and hopefully cache those results more frequently compared to the previous multiple-fetch behavior.
To reduce cache fragmentation, Single Fetch changes the default revalidation behavior on GET navigations. Previously, Remix would not re-run loaders for reused ancestor routes unless you opted-in via shouldRevalidate. Now, Remix will re-run those by default in the simple case for a Single Fetch request like GET /a/b/c.data. If you do not have any shouldRevalidate or clientLoader functions, this will be the behavior for your app.
Adding either a shouldRevalidate or a clientLoader to any of the active routes will trigger granular Single Fetch calls that include a _routes parameter specifying the subset of routes to run.
If a clientLoader calls serverLoader() internally, that will trigger a separate HTTP call for that specific route, akin to the old behavior.
For example, if you are on /a/b and you navigate to /a/b/c:
shouldRevalidate or clientLoader functions exist: GET /a/b/c.dataroutes/a opts out via shouldRevalidate:
GET /a/b/c.data?_routes=root,routes/b,routes/croutes/b has a clientLoader:
GET /a/b/c.data?_routes=root,routes/a,routes/cclientLoader calls serverLoader():
GET /a/b/c.data?_routes=routes/bIf this new behavior is sub-optimal for your application, you should be able to opt-back into the old behavior of not-revalidating by adding a shouldRevalidate that returns false in the desired scenarios to your parent routes.
Another option is to leverage a server-side cache for expensive parent loader calculations.
Previously, Remix would always revalidate all active loaders after any action submission, regardless of the result of the action. You could opt-out of revalidation on a per-route basis via shouldRevalidate.
With Single Fetch, if an action returns or throws a Response with a 4xx/5xx status code, Remix will not revalidate loaders by default. If an action returns or throws anything that is not a 4xx/5xx Response, then the revalidation behavior is unchanged. The reasoning here is that in most cases, if you return a 4xx/5xx Response, you didn't actually mutate any data so there is no need to reload data.
If you want to continue revalidating one or more loaders after a 4xx/5xx action response, you can opt-into revalidation on a per-route basis by returning true from your shouldRevalidate function. There is also a new actionStatus parameter passed to the function that you can use if you need to decide based on the action status code.
Revalidation is handled via a ?_routes query string parameter on the single fetch HTTP call which limits the loaders being called. This means that when you are doing fine-grained revalidation, you will have cache enumerations based on the routes being requested - but all of the information is in the URL so you should not need any special CDN configurations (as opposed to if this was done via a custom header that required your CDN to respect the Vary header).
